Index 2 XLFE Series Pulse Oximeter Tester
The most versatile optical simulator for oximeters on the market today.
Index 2 XLFE Series Pulse Oximeter Tester
Index 2 XLFE Series Pulse Oximeter Tester
Motion presets, player mode, transmission level control (TLC), and computer commands boost testing ability. The Index 2 XFLE can also be configured to include an optional electrical simulation feature with probe test. Optical and electrical simulations allow technicians to isolate problems quickly. The probe test identifies defective probes with quantitative test results.
Key Features
- Portable
- Ten preloaded manufacturers’ R-curves
- User-definable “makes” for parameters of most other manufacturers
- R-curves for Masimo, Nonin and Philips Medical Systems (formerly Agilent / H-P) oximeters
- Six downloadable R-curve spaces available
- Simultaneous simulation of motion and arterial-oxygen levels
- Arterial wave-amplitude scale, calibrated in units of perfusion
- Tap/shiver motion simulations to explore the impact of motion
- RS-232 port for computer control
- Physiological finger
- Electrical simulations with probe testing
| Model Name | Part Number | Description |
|---|---|---|
| INDEX2LFE-USA120V | 2250244 | Index® 2XLFE SpO2 Simulator (Optical Finger Simulation plus Electrical Simulations with Probe Testing) USA 120 V Includes: Operator’s Manual (171010) Battery Charger (INDEX2-CHRG/US) Electrical simulation cables: Nellcor (N100, N200, and N3000), Ohmeda (5170524, 5170508) Probe test cables: Nellcor (N100, N200, and N3000), Ohmeda (5170525, 5170506) |
| SPO2 SIMULATOR (OP AND ELEC SIM) | 2395309 | Index® 2XLFE Schuko 250 V |
| SPO2 SIMULATOR (OP & ELEC SIM) | 3938262 | Index® 2XLFE – Brazil 250 V |
| SPO2 SIMULATOR (OP & ELEC SIM) | 2399939 | Index® 2XLFE United Kingdom 250 V |
| SPO2 SIMULATOR (OP & ELEC SIM) | 2447465 | Index® 2XLFE– Japan 100 V |
| SPO2 SIMULATOR (OP & ELEC SIM) | 3938262 | Index® 2XLFE – Brazil 250 V |
| SPO2 SIMULATOR (OP & ELEC SIM) | 3938262 | Index® 2XLFE – Brazil 250 V |
Reflectance type probes are not compatible with Index 2 series simulators.
If the probe can physically fit over the Index 2 Test Finger, the probe can be used during testing.
The make is determined by the type of probe technology being used, not the brand of the monitor. Many oximeter manufacturers outsource their oximeter technology to other monitor manufacturers. The Index 2 optical simulation is based upon the make of the sensor being used.
The "M1191 New" make is selected from Index 2 user interface when the Hewlett Packard rubber-type sensors are being used in an Index 2 optical simulation.
The "PMS M1190" make should be selected from Index2 for this electrical simulation.